centos6.8搭建dhcp服务器

centos6.8搭建dhcp服务器

一、安装dhcp软件

[root@dns-server ~]# yum install dhcp -y

二、配置dhcp参数

[root@dns-server ~]# cat /etc/dhcp/dhcpd.conf    ## DHCP Server Configuration file.#   see /usr/share/doc/dhcp*/dhcpd.conf.sample#   see 'man 5 dhcpd.conf'#subnet 192.168.3.0 netmask 255.255.255.0 {  #这个是设置ip网段和子网掩码  range 192.168.3.10 192.168.3.40;              #自动分配的ip地址段  option domain-name-servers 192.168.3.1;       #dns服务器地址  option domain-name "dns.test.com";            #dns服务器名字  option routers 192.168.3.254;                 #网关  option broadcast-address 192.168.3.255;       #广播地址  default-lease-time 600;                         max-lease-time 7200;                          }[root@dns-server ~]# /etc/init.d/dhcpd start

三、在客户端测试

C:\Documents and Settings\Administrator>ipconfigWindows IP ConfigurationEthernet adapter 本地连接:        Connection-specific DNS Suffix  . : dns.test.com        IP Address. . . . . . . . . . . . : 192.168.3.10        Subnet Mask . . . . . . . . . . . : 255.255.255.0        Default Gateway . . . . . . . . . : 192.168.3.254C:\Documents and Settings\Administrator>

四、dhcp参数模板

[root@dns-server ~]# cat /usr/share/doc/dhcp-4.1.1/dhcpd.conf.sample # dhcpd.conf## Sample configuration file for ISC dhcpd## option definitions common to all supported networks...option domain-name "example.org";option domain-name-servers ns1.example.org, ns2.example.org;default-lease-time 600;max-lease-time 7200;# Use this to enble / disable dynamic dns updates globally.#ddns-update-style none;# If this DHCP server is the official DHCP server for the local# network, the authoritative directive should be uncommented.#authoritative;# Use this to send dhcp log messages to a different log file (you also# have to hack syslog.conf to complete the redirection).log-facility local7;# No service will be given on this subnet, but declaring it helps the # DHCP server to understand the network topology.subnet 10.152.187.0 netmask 255.255.255.0 {}# This is a very basic subnet declaration.subnet 10.254.239.0 netmask 255.255.255.224 {  range 10.254.239.10 10.254.239.20;  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;}# This declaration allows BOOTP clients to get dynamic addresses,# which we don't really recommend.subnet 10.254.239.32 netmask 255.255.255.224 {  range dynamic-bootp 10.254.239.40 10.254.239.60;  option broadcast-address 10.254.239.31;  option routers rtr-239-32-1.example.org;}# A slightly different configuration for an internal subnet.subnet 10.5.5.0 netmask 255.255.255.224 {  range 10.5.5.26 10.5.5.30;  option domain-name-servers ns1.internal.example.org;  option domain-name "internal.example.org";  option routers 10.5.5.1;  option broadcast-address 10.5.5.31;  default-lease-time 600;  max-lease-time 7200;}# Hosts which require special configuration options can be listed in# host statements.   If no address is specified, the address will be# allocated dynamically (if possible), but the host-specific information# will still come from the host declaration.host passacaglia {  hardware ethernet 0:0:c0:5d:bd:95;  filename "vmunix.passacaglia";  server-name "toccata.fugue.com";}# Fixed IP addresses can also be specified for hosts.   These addresses# should not also be listed as being available for dynamic assignment.# Hosts for which fixed IP addresses have been specified can boot using# BOOTP or DHCP.   Hosts for which no fixed address is specified can only# be booted with DHCP, unless there is an address range on the subnet# to which a BOOTP client is connected which has the dynamic-bootp flag# set.host fantasia {  hardware ethernet 08:00:07:26:c0:a5;  fixed-address fantasia.fugue.com;}# You can declare a class of clients and then do address allocation# based on that.   The example below shows a case where all clients# in a certain class get addresses on the 10.17.224/24 subnet, and all# other clients get addresses on the 10.0.29/24 subnet.class "foo" {  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";}shared-network 224-29 {  subnet 10.17.224.0 netmask 255.255.255.0 {    option routers rtr-224.example.org;  }  subnet 10.0.29.0 netmask 255.255.255.0 {    option routers rtr-29.example.org;  }  pool {    allow members of "foo";    range 10.17.224.10 10.17.224.250;  }  pool {    deny members of "foo";    range 10.0.29.10 10.0.29.230;  }}[root@dns-server ~]#