• linkedu视频
  • 平面设计
  • 电脑入门
  • 操作系统
  • 办公应用
  • 电脑硬件
  • 动画设计
  • 3D设计
  • 网页设计
  • CAD设计
  • 影音处理
  • 数据库
  • 程序设计
  • 认证考试
  • 信息管理
  • 信息安全
菜单
linkedu.com
导航菜单
  • 网页制作
  • 数据库
  • 程序设计
  • 操作系统
  • CMS教程
  • 游戏攻略
  • 脚本语言
  • 平面设计
  • 软件教程
  • 网络安全
  • 电脑知识
  • 服务器
  • 视频教程
  • windows
  • 服务器硬件
  • 服务器运维
  • 云计算
  • 虚拟化
  • IIS教程
  • Linux
  • Apache
  • Ftp
  • DNS
  • Nginx
您的位置:首页 > 服务器 >windows > 多路径链路状态异常解决

多路径链路状态异常解决

作者:网友 字体:[增加 减小] 来源:互联网

本文主要包含sctp链路路径切换事件,链路状态协议,链路状态,链路状态算法,链路状态数据库等服务器相关知识,网友希望可以进行参考

前言:心系团圆共禅娟,把酒言欢寄情怀,一生,一世的祝福

 

环境介绍:

主机名称:fly007
操作系统:suse 10 sp2 64bit
存储:富士通DX8700
富士通多路径软件,版本信息如下:
fly007:~ # /opt/FJSVmpd/bin/iompadm version
Version 2.0.21-1.0

 

1、查看多路径软件链路状态,如下所示:

fly007:~ # /opt/FJSVmpd/bin/iompadm info
internal error: fopen: No such file or directory: /sys/bus/mpdx/drivers/mpdh/instance_num
internal error: error code = 7-2

2、重启操作系统,依然报如上错误
3、查看光纤交换机配置正确,富士通建议重装多路径软件
4、卸载多路径软件,并重启主机

fly007:~ # /opt/FJSVmpd/system/mpdpkgrm //可查看多路径软件光盘中的readme.txt
Please check /etc/modprobe.conf.local and /etc/modprobe.conf, edit /boot/grub/menu.lst, make initrd and reboot this system.
fly007:~ # sync
fly007:~ # sync
fly007:~ # sync
fly007:~ # reboot

5、系统重启完毕后,检查/etc/sysconfig/kernel中的INITRD_MODULES那行是否存在lpfc,mpdh,如下所示:

fly007:~ # cat /etc/sysconfig/kernel | grep INITRD_MODULES
INITRD_MODULES="mptsas processor thermal fan jbd ext3 edd bnx2 e1000 tg3 lpfc mpdh"

6、重装多路径软件,重启操作系统:

fly007: # ls
MPDV2.0L21_20110202.iso
fly007: # mount -o loop MPDV2.0L21_20110202.iso  /mnt
fly007: # cd /mnt/
fly007:/mnt # ls
P2U3-0031-10ENZ0.pdf  P2U3-0031-10Z0.pdf  RHEL4  RHEL5  RHEL6  gpl.txt  mpdpkgadd  readme.txt  readme_utf8.txt  src
fly007:/mnt # ./mpdpkgadd
Progressing
Preparing...                ########################################### [100%]
1:FJSVmpd_se-doc         ########################################### [ 50%]
2:FJSVmpd_se             ########################################### [100%]
.....
If you have the latest applicable patch of ETERNUS Multipath Driver,
please apply it. After that, please reboot this system.
If not, please reboot this system now.
fly007:/mnt #cd ..
fly007:~ #umount /mnt
fly007:~ #sync
fly007:~ #sync
fly007:~ #sync
fly007:~ #reboot

7、重启系统完毕后,查看多路径链路状态正常

fly007:~ # /opt/FJSVmpd/bin/iompadm info
IOMP: vhba0
Element:
DISK: ETERNUS_DX8000-  6A1314-0000-0002 (sdb)
PATH:
sdb 0000:0b:00.0 active "online" 12, 42, 15
sdb 0000:0b:00.1 active "online" 11, 41, 2

官方安装多路径软件方法

6. Installation of the ETERNUS Multipath Driver

  All commands must be run as root user in this section.
  (# represents the root user prompt.)

 6-1. For SUSE Linux Enterprise Server 9, SUSE Linux Enterprise Server 10
      or SUSE Linux Enterprise Server 11

      The gcc package, the kernel-source package, and the make package must
      be installed on the server. Please run the following commands and 
      check that the packages have been installed.

      # rpm -qi gcc
      # rpm -qi kernel-source
      # rpm -qi make

      If the packages are not installed, please install them first.

 6-2. Install ETERNUS Multipath Driver

 6-2-1. For Red Hat Enterprise Linux 6 or SUSE Linux Enterprise Server 11

   1) Set up the connection method (topology) referring to the manual of
      a card.

   2) Mount CD-ROM drive and run the "mpdpkgadd" command.

      # mount /dev/cdrom /mnt/cdrom
      # cd /mnt/cdrom
      # ./mpdpkgadd

   3) The following message is displayed and the installation is completed.

      If you have the latest applicable patch of ETERNUS Multipath Driver,
      please apply it. After that, please reboot this system.
      If not, please reboot this system now.

 6-2-2. For Red Hat Enterprise Linux AS v.4, Red Hat Enterprise Linux ES v.4,
        Red Hat Enterprise Linux 5, SUSE Linux Enterprise Server 9,
        SUSE Linux Enterprise Server 10 or SUSE Linux Enterprise Server 11

   1) Set up the connection method (topology) referring to the manual of
      a card when using PG-FCD101, PG-FCD102, PG-FC205, PG-FC205L, PG-FC206, 
      PG-FC206L or Card made by QLogic company.

   2) Mount CD-ROM drive and run the "mpdpkgadd" command.

      # mount /dev/cdrom /mnt/cdrom
      # cd /mnt/cdrom
      # ./mpdpkgadd

   3) If PG-FCD101, PG-FCD102, PG-FC205, PG-FC205L, PG-FC206, PG-FC206L or
      Card made by QLogic company is used to connect the storage system to 
      the server.

      Answer "y" to the following question. If using other card, answer "n".

      Is QLogic fibre channel card used to connect ETERNUS storage system (y/n)?

   4) If MC-08FC11, MC-08FC31, MC-08FC41, MC-08FC51, MC-08FC61, MC-08FC71,
      MC-08FC81, MC-08FC91, MC-0JFC11, MC-0JFC21, PG-FC201, PG-FC202, PG-FC202L,
      PG-FC203, PG-FC203L, PG-FC204, PG-FC204L, PG-FCD201, PG-FCD202, PG-FC105,
      PG-FC106, PG-FC107, PG-292B, PG-292BL, Card made by Emulex company
      is used to connect the storage system to the server.

&nb

分享到:QQ空间新浪微博腾讯微博微信百度贴吧QQ好友复制网址打印

您可能想查找下面的文章:

  • 多路径链路状态异常解决

相关文章

  • dhcp服务器的总结
  • Windows操作系统的经典蓝屏场景回顾[多图]
  • VM虚拟机提示operating system not found的解决方法
  • 提高数据中心能效必须与业务目标挂钩
  • DirectX:内存、显存太大引起的问题
  • Linux squid代理一基本概念
  • perl编写ping脚本
  • Windows Server 2008巧妙配置DHCP服务器
  • 集成iSCSI和FC存储的五种常见方法
  • Windows Server 2003 iis配置php支持图文教程

文章分类

  • windows
  • 服务器硬件
  • 服务器运维
  • 云计算
  • 虚拟化
  • IIS教程
  • Linux
  • Apache
  • Ftp
  • DNS
  • Nginx

最近更新的内容

    • kb969947 Windows 内核模式驱动程序中的漏洞
    • 如何清除右键菜单里的无效与垃圾选项
    • Apache中怎么修改默认站点目录
    • 解决Win8在VMware Fusion中使用Wacom笔不正常的问题
    • Raid阵列与lvm逻辑卷组(下)
    • Windows 2003开机自动登陆,怎么自动登录呢?
    • windows 2003 无法开启Terminal Service
    • apache 和iis共用80端口多种解决办法
    • windows搭建memcached环境配置方法
    • nginx web缓存配置

关于我们 - 联系我们 - 免责声明 - 网站地图

©2020-2025 All Rights Reserved. linkedu.com 版权所有