本文主要包含equallogic,dell equallogic,equallogic ps m4110,equallogic ps6210e,equallogic ps6100等服务器相关知识,网友希望可以进行参考
一：安装：
step1:使用串口线连接，打开超级终端，选对端口，其他一切默认。
step2:开启EqualLogic,等待终端提示输入用户名。
step3:如果有用户名和密码，输入，默认用户名为grpadmin,密码grpadmin。
step4:如果没有用户名和密码。输入用户名recoverpassword，打DELL客服电话或发送mail到supportnp@equallogic.com，得到一个临时的验证码，可用于修改grpadmin的密码
step5:输入密码后，如果是全新存储，会自动提示进行安装，相当于进入控制台后执行setup,过程大致如下：
[PFAIL][ENTRY][BIST][1][EQL][WDOG][TWDOG][WFP][210][C2F][WFR][CM1D][MESR][SCAN][BOOT2][PROC][BOARD][SMP][IOBUS][FLASH][USB]########################################################## ## Dell (tm), Inc. Storage Array ## Copyright 2001-2011 ## ## Controller Information: ## Part=70-0400 Rev=A03 SN= 13740025D00AO ECO=C00 ## ##########################################################Bootloader Version 3.6.4 (SWINT Rev:1)Compiled on Mon Jun 27 10:20:45 EDT 2011(type h for help)Enter Ctrl-P for boot promptExecuting bootcmd0 [dload sd primary/eqlstor.gz]0X80231000/10920 0X85f07c00/23145556 entrypt 80231000Executing bootcmd1 [run]cpu_online_map=ffff, userapp_cpu_map ffffpsb_os_active_mask=0, psb_os_mask=0boot1_info: userapp_cpu_map=ffff, psb_os_cpu_map=0 cpu_online_map = 0xffffJumping to the application... 0x80231000------------------------------------------------------------Preparing ffff bitmask of cpus to runNo network device to cleanupcount = 16, total = 16All slave cpus (16) ack'ed userapp initcount = 4, total = 4All slave cpus (4) ack'ed message ring init rcp_base_addr 0xbd860000 mips_nvram_kseg1_addr 0xbd000000C2F Power Module revision number 0x04000000 string A00emm_register_driver_ioctl: registering: XLR xlrioctlDell, Inc. Storage ArrayCopyright 2001-2012 Dell, Inc. 70-0400 Rev=A03 Date=025D SN=00AO ECO=C00MIPS32/64 params: cpu arch: 64MIPS32/64 params: TLB entries: 64MIPS32/64 params: Icache: line = 32, total = 32768, ways = 8 sets = 128MIPS32/64 params: Dcache: line = 32, total = 32768, ways = 8 sets = 128 picache_stride = 4096 picache_loopcount = 8 pdcache_stride = 4096 pdcache_loopcount = 8skipping PMC updatecpu model: xls616processor step: B1eql_cache_starting_addr 0x30000000 eql_cache_size is 0x50000000Enable XLR Address ErrorsEnable XLR L1/L2 Bit ErrorsEnabling non-maskable intsemm_register_driver_ioctl: registering: CFE_BL envioctlCopyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 The NetBSD Foundation, Inc. All rights reserved.Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved.NetBSD 1.6.2 (EQL.PSS) #0: Fri Oct 26 03:00:16 EDT 2012 build@m64:/buildarea/V5.2.6__Fri_Oct_26_2012_02_56_46_EDT/bin/destdir.sbmips.release/EQL.PSS239 MB memory, 182 MB free, 12336 KB in 3084 buffersstartup CPU 5....wakeup_cpu: 0x80037c00: cpu 5 running QRQ ETH RECVstartup CPU 8....wakeup_cpu: 0x8003ac00: cpu 8 running QRQ TIME KEEPER and DMAstartup CPU 9....wakeup_cpu: 0x8003bc00: cpu 9 running QRQ ETH XMITstartup QRQ processorstartup CPU 12....wakeup_cpu: 0x8003ec00: cpu 12 running NetBSD threadstartup CPU 13....wakeup_cpu: 0x8003fc00: cpu 13 running NetBSD XOR threadstartup CPU 14....wakeup_cpu: 0x80040c00: cpu 14 running NetBSD XOR threadNVRAM header is validshutdown cause: array was resetshutdown stage code: 0NVRAM indicates a clean shutdown with code 34.Peer CM already up and active.mdi0 (root)Update SYS2IO credits: (0xbef000d4) = 0xe020010DDR GLB PARAMS (Channel A) = 0x961...ECC ENABLEDDDR GLB PARAMS (Channel C) = 0x961...ECC ENABLEDcpu0 at mdi0 busid 0Chip frequency=1000000000 Hz: 1000.00MHz (hz cycles = 10000000, delay divisor = 1000)cpu0: RMI XLS (0xc4003) Rev. 3 with software emulated floating pointcpu0: 32KB/32B 8-way set-associative L1 Instruction cache, 64 TLB entriescpu0: 32KB/32B 8-way set-associative write-back L1 Data cachemembridge0 at mdi0 busid 1iodi0 at membridge0 busid 0eqlscn1 at iodi0 iobase 0x1ef14000 intr 4eqlscn1: channel 0: consolexlrtimer0 at iodi0 iobase 0x1ef00000 intr 2fmn0 at iodi0 iobase 0x1ef00000 intr 0pcix at iodi0 iobase 0x1ef09000 intr 0 not configuredhypertransport at iodi0 iobase 0x1ef0a000 intr 5 not configuredxlrdma0 at iodi0 iobase 0x1ef1a000 intr 0xdog0 at iodi0 iobase 0x1ef00000 intr 10Watchdog timer 0xlri2c0 at iodi0 iobase 0x1ef00000 intr 0xlri2c_attach: bus 0 address: 0xbef16000, bus 1 address: 0xbef17000I2C Bus 0 Status: 0x02I2C Bus 1 Status: 0x02Emm registering serial bus driver.vsc33x_match: Found SGMII/XAUI crosspoint at 0x3vsc33x1 at xlri2c0 offset 0x3xlri2c_manage_porfidio_mux: Unknown device 0x18 on PS Muxpsseeprom_match: Found a Match: off: 0x69, chan: 1, flags: 0x1psseeprom0 at xlri2c0 offset 0x69psseeprom_attach: Accessing Command Module eeprom. SB Dev: 0x69 on SMBus Channel: 1Checksum: 0x94 for Command Module eeprom is valid.psseeprom_getsn: String: 00AO, Number: 201psseeprom_match: Found a Match: off: 0x350, chan: 0, flags: 0x0psseeprom1 at xlri2c0 offset 0x350psseeprom_attach: Accessing C2F Power Module eeprom. SB Dev: 0x350 on SMBus Channel: 0Checksum: 0xcd for C2F Power Module eeprom is valid.psseeprom_get_eco: number 0 str C00xlri2c_manage_porfidio_mux: Unknown device 0x6 on PS Muxmaxpwr_match: Reading device addr: 0x50maxpwr0 at xlri2c0 offset 0x50maxpwr_attach: Attaching dev addr: 0x50maxpwr_attach: Program Version: 0x00000015xlri2c_manage_porfidio_mux: Unknown device 0x68 on PS Muxds1388c0 at xlri2c0 offset 0x68ds1388_attach: Addr: 0x68, Bus: 1Emm registering toy clock routines.C2F Power module charged to 5.016VC2F Power module mid voltage = 2.508Vads1015a2d0 at xlri2c0 offset 0x48ads1015a2d_attach: Addr: 0x48, Bus: 0pcie_match: PCIe Matchxlspcie0 at iodi0 iobase 0x1ef1e000 intr 0 SBC REG: PCIE_CFG_BAR (64) = 0x180001 SBC REG: PCIE_ECFG_BAR (65) = 0xc00000XLSPCIE: pci extended config base: 0xc0000000 SBC REG: PCIE_MEM_BAR (66) = 0xd0001f SBC REG: PCIE_IO_BAR (67) = 0x100001 (PCIE Dev/Vend 0) 0xabcd182epcie_attach: MSI Capability Reg: 0x00817005pcie_attach: MSI Lower Address Reg: 0xfee00000pcie_attach: MSI Upper Address Reg: 0x00000000pcie_attach: MSI Data Reg: 0x00000000pcie_attach: PCIE_CTRL4 0xaaaa2222pcie_attach: PCIE_LINK0_MSI_ENABLE 0x00000001pcie_attach: LSI ID: 0x00761000I/O BAR: 0x10000001MEM 0 Lo: 0xd0000004MEM 0 Hi: 0x00000000MEM 1 Lo: 0xd0040004MEM 1 Hi: 0x00000000pcie_attach: LSI MSI Capability: 0x0080c005 0x1ef1e000 0x0 0x0pci0 at xlspcie0 bus 1pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv okpcipss0 at pci0 dev 0 function 0: LSI SASGen2 (rev. 0x5)ehci0 at iodi0 iobase 0x1ef25000 intr 4ehci0: EHC